SerialPort

{{{ [serial]

1. ====NEW/Changed in 0.65
2. serial1-4 -- set type of device connected to com port.
3. Can be disabled, dummy, modem, directserial.
4. Additional parameters must be in the same line in the form of
5. parameter:value. Parameters for all types are irq, startbps, bytesize,
6. stopbits, parity (all optional).
7. for directserial: realport (required).
8. for modem: listenport (optional).
9. Example: serial1=modem listenport:5000

serial1=dummy serial2=dummy serial3=disabled serial4=disabled }}}